18
IEC 61000-4-2
±8 kV air
synthetic material, the
relative humidity should be
at least 30 %.
Power
frequency
(50/60 Hz)
magnetic
field
IEC 61000-4-8
3 A/m
3 A/m
Power frequency magnetic
fields should be at levels
characteristic of a typical
location in a typical
commercial or hospital
environment.
Guidance and manufacturer´s declaration – electromagnetic
immunity –for EQUIPMENT and SYSTEM that are not LIFE-
SUPPORTING
Guidance and manufacturer´s declaration – electromagnetic immunity
The CLETEF-786 Infrared Thermometer is intended for use in the
electromagnetic environment specified below. The customer or the user of
the CLETEF-786 Infrared Thermometer should assure that it is used in such
an environment.
Immunity test
IEC
60601
test level
Compliance
level
Electromagnetic
environment -
guidance
Radiated RF
IEC 61000-4-3
3 V/m
80 MHz
to 2.5
GHz
3 V/m
Portable and mobile RF
communications equipment
should be used no closer to
any part of the CLETEF-786
Infrared Thermometer,
including cables, than the
recommended separation
distance calculated from the
equation applicable to the
frequency of the transmitter.
Recommended separation
distance
3
Operating Conditions
Temperature: 10
C to 40
C
Humidity: 15%-95%RH, non-condensing
Atmospheric pressure: 86kPa to 106kPa
Storage and Shipping Conditions
Temperature: -20
C to 55
C
Humidity: 0-95% RH, non-condensing
Atmospheric pressure: 50kPa to 106kPa
Battery Installation
Put the two AAA batteries into battery
compartment in correct polarities.
Push the battery cover horizontally along the
arrow to close.
Notes:
☆
If you using the thermometer for the first time, please pull out the
Plastic sheet .
☆
Battery polarities should be correct. Otherwise, the device may be
damage.
☆
Please remove the batteries if the thermometer will not be used for a
prolonged time.
Warnings
Please keep this infrared thermometer away from children
This thermometer is not a substitute for Medical Assistance
The infrared thermometer is not waterproof, Keep it away from
water.
