3 Basis
3.5 Fitting M1 door
Fit the handle on the door as described in the assembly instructions supplied with the handle.
Figure 4
Top view
Cabin model 1
Figure 5
Detail C
Assembly corner piece on top bar
Self-tapping screw
Detail D
Fitting corner piece on door frame
'\
\
' ..................
;'-Self-tapping screw
�
/
-
----
Detail E
Assembly corner piece on door frame
3)
The fitting of the door in a model 1 cabin is different to with the other models. Here the door is fitted in a corner. In the
corner the door frame is fitted using 3 corner pieces 35x57 (fig.4). Also see section 3, figure 2 on page 8. The corner
pieces are fitted to the casing with self-tapping screws (detail D/E).
The rest of the assembly of the door is the same as the other cabin models.
Note! To prevent damage to casing and hinges the assembly of a door stopper is required. This is not
included in the delivery.
SEDNA LINE 2008/05
15
