3 Basis
3.4.1 Fitting the roof on the U-setup
The method described here is only recommended with not too large cabins where the assembled roof
can be lifted and manoeuvred.
Figure 1
Starting position
Connected roof parts stand on the inside of
the cabin against the frame.
Step 2.
Slide the roof back a little and place it on the
other side of the U-setup.
SEDNA LINE 2008/05
Step 1.
Lift the roof by the underside and slide it over
the frame parts of the U-setup as shown .
.
.
.
.
.
Step 3.
Fix the roof, if necessary temporarily with
(glueing) clamps, on the U-setup.
12
