Installation Guide / SolarRoof Tilt Legs
18
Code-Compliant Planning and Installation Guide V 1.0 (New Zealand) - Complying with AS/NZS 1170.2-2021 -
- System Overview -
Safe Torques
Please refer to safe torques defined in this guide as shown in the figure below. If power tools are required, Clenergy
recommends the use of low speed only. High speed and impact drivers increase the risk of bolt galling (deadlock). If
deadlock occurs and you need to cut fasteners, please make sure that there is no load on the fastener before you cut it.
Avoid damaging the anodized or galvanized surfaces.
1) Adjustable Tilt Legs
Note:
Grounding Z Module, External Teeth Lock Washers, Spring washer and corrugated shim (with pins) on the diagram
above are to create the electrical continuity between rail and rear leg tubes.