Installation Guide / SolarRoof Tilt Legs
22
Code-Compliant Planning and Installation Guide V 1.0 (New Zealand) - Complying with AS/NZS 1170.2-2021 -
- Installation Instructions -
Rail Installation
According to the installation plan, determine the mounting position of Rail.
To connect several Rails together, slide half of the splice into the rear side
of the Rail. Fasten the first M8 Bolt using an Allen key, and slide the next
Rail into the Splice as shown in Figure 11 and 12. Tighten the second M8
Bolt using an Allen key. Splice provides the electrical connection between
the 2 rails through the pressure bolts. This eliminates the need of using 2
earthing lugs.
Recommended torque for M8 bolts is 10~12 N·m
After confirming the position of Rail, fasten the Front and Rear Leg, as
shown in Figure 13, 14 and 15.
Recommended torque for M8 bolts is 18~20 N·m
Figure 11
Figure 12
Figure 13
Install the remaining Front and Rear Legs in Figure 10.
Figure 10
NOTE:
WHEN USING TIN INTERFACES FOR INSTALLATION
WORKS, SCREWS NOT EXPOSED TO FREQUENT RAIN
SHOULD BE WASHED DOWN WITH FRESH WATER AT
LEAST EVERY 6 MONTHS TO MEET THE WARRANTY
CONDITIONS OF BUILDEX SCREWS.
