Installation Guide / SolarRoof Tilt Legs
21
Code-Compliant Planning and Installation Guide V 1.0 (New Zealand) - Complying with AS/NZS 1170.2-2021 -
- Installation Instructions -
Figure 4
Rear Leg Installation
According to the installation plan, after confirming the length L of the
Rear Leg, fasten two M8*12 bolts as shown in Figure 4.
Recommended torque for M8*12 bolts is 18~20 N·m
According to the installation plan, either two screws or single screw (Buildex 14-11 x 70 Hex Head Zips screw) is used to
install rear leg. Using preassembly or non-preassembly rear legs will make installation steps a bit different as well. See
the installation images in Figures 5-9.
Figure 5
(Non-preassembly Rear Leg Installation
with Two Screws)
Figure 6
(Non-preassembly Rear Leg Installation
with Single Screw)
Figure 7
(Preassembly Rear Leg Installation with Two Screws)
Figure 8
(Preassembly Rear Leg Installation with Single Screw)
Figure 9
(Tin Foot Rear Leg Installation)
Notes:
1. Two screws shall be installed through two side holes
of rear leg (as shown in Figures 5 and 7);
2. Single screw shall be installed through central hole
only of rear leg (as shown in Figures 6 and 8).
