Installation Guide_PV-ezRack_ezShade_AU_V1.0
1/10 Duerdin Street, Clayton VIC 3168 Australia
Tel: +61 3 9239 8088 Fax: +61 3 9239 8024
E-mail: [email protected] www.clenergy.com.au
01
page
of 25
Introduction
Clenergy PV-ezRack
®
ezShade™ is a pre-
assembled ground mount system suitable
for large scale commercial and utility scale
installations. PV-ezRack
®
ezShade™ has
been developed to fit any PV module. The
innovative and patented T-Rails simplify and
improve the accuracy of the installation. Using
high quality engineered components PV-
ezRack
®
ezShade™ saves developers and
installers, time and money when delivering
large scale projects.
Please review this manual thoroughly before
installing your PV-ezRack
®
ezShade™system.
This manual provides
1) Simple introduction of the installation relating
to PV-ezRack
®
ezShade™ Mounting systems.
2) Planning and installation instructions for PV-
ezRack
®
ezShade™.
PV-ezRack
®
ezShade™parts, when installed in
accordance with this guide, will be structurally
sound and meet the AS/ NZS 1170.2:2011
(R2016) standards. During installation and
especially when working on the roof, please
comply with the appropriate safety regulations,
and please also comply with the relevant
regulations of your local region.
Please check that you are using the current
version of the Installation Manual by contacting
Clenergy Australia by email on tech@ clenergy.
com.au, or your local representative.
The installer is solely responsible for:
• Complying with all applicable local or national
building codes, including any that may
supersede this manual;
• Ensuring that PV-ezRack and other products
are appropriate for the particular installation
and the installation environment;
• Using only PV-ezRack parts and installer
supplied parts as specified by PV-ezRack
(substitution of parts may void the warranty
and invalidate the letter of certification on
page 2);
• Recycling: Recycle according to the local
relative statute.
• Removal: Reverse installation process.
• Ensure that there are no less than two
professionals working on panel installation.
• Ensure the installation of all electrical
equipment is performed by licensed
electricians.
• Ensuring safe installation of all electrical
aspects of the PV array. This includes providing
adequate earth bonding of the PV array and
PV-ezRack
®
ezShade™ components as
required in AS/NZS 5033-2014 AMDT 2 2-20 .
Introduction
Planning
Tools &Components
System Overview
Installation Instruction
01
02
05
07
10
List of Contents
1. Introduction
