Installation Guide_PV-ezRack Ascent-V1.1 (June 2021)
12
page
of 12
Clenergy China
999-1009 Min'an Rd, Huoju Hi-tech Ind. Dev. Zone
Xiang'an District 361101, Xiamen, Fujian, China
T
：
+86 592 311 0088
F
：
+86 592 599 5028
E
：
4.8.1 Hexagon screw Installation
After the installation of Front Leg and Base,
fasten Hexagon screws with the holes of front
leg.
Note: It is required to install two Hexagon
screws per Front Leg.
4.8.2 Grounding Clip Installation
Before module and clamps installation, it is
important to arrange how to position grounding
clips to achieve earthing continuity between
each PV modules.
Place the PV modules on the Front and Rear
Leg.
Incline the Inter and End clamp to fit the top
channel of Front and Rear Leg.
Slightly lift the PV Module and slide Clamps
and Grounding Clips into position. The teeth on
Grounding Clip will automatically align when
the Inter Clamp is properly installed as shown
in figures on the right.
4.8 Grounding System Installation
Installation Instruction
Install with Inter Clamp
Install with End Clamp
