Clemco BNP 220, Owner'S Manual

Page: 17 / 33

17
4.4.5 Pulsing (cleaning) dust collector cartridge / replace cartridge / disposal of residues
Replace cartridge - pulse filter cartridge two times
-start again cabinet and turn off after more than 2min

+ ca. 5 minutes dedusting pulse
- push emergency stop
- close air supply
- depressurize installation (see 4.4.1)
- unscrew filter cover
- pull a
( ≥ 120 l)
plastic bag over the filter cartridge
- unscrew the nuts on the flange and pull out the filtercartridge with the
plastic bag.
- screw the new filter cartridge and take care of the position of the seal kit.
- Close dust collector cover
Empty dust container -release the dust container from the cover
WARNING! If toxical residues, dispose dust as hazardous waste!
4.4.6 Window replacement
No.: Description
1 Filler strip
2 molding
3 Place for filler strip
4 Cabinet wall (fits into narrow slot)
5 Window tool
6 Filler strip
7 window (fits into expanded slot)
Pull filler strip from the window molding
Remove window Push the window from the cabinet inside
Install a new window molding Strip channel facing the front of the cabinetg
Install window Push into the slot
Thread filler strip With installation tool