Clemco BNP 220, Owner'S Manual

Page: 14 / 33

14
stopping? Test cabinet with media, if no irregularities can be detected. Otherwise
remedy errors. Therefor see section 6.
Media loading - Exhauster off.
- add media slowly into reclaimer hopper through the reclaimer door (blast pot).
- Media capacity (initial fill)
+Blast machine: 20l: 12l abrasive
+Blast Machine : 40l: 25l abrasive
+Blast machine: 100l: 60l abrasive
+Blast machine: 200l: 120l abrasive
Operation checkout with
media
-Close doors.
- adjust blast pressure.
-Hold nozzle in direction grate. Step on the foot pedal

Blast process starts
Check, if dust passes of (second person). Critical zones:
-Doors
-suction hose connections
-Connections between dust collector and dust container. Leak tightness can be
remarked only during dedusting.
4 Instruction handbook
4.1 Set up and operation, Shut down
Turn on air supply
Adjust blast pressure
Switch on electricity Main switch and green push button
Load parts to be blasted into
the cabinet
Close doors
Blasting Hold blast gun/nozzle and step on the foot pedal
Blow off media Clean parts with blow off gun
Disconnect electricity -Main switch
- Red push button
- Dedusting process works still for ca. 5 min
Disconnect air supply
4.2 Emergency stop
Push emergency stop
button
Electrical supply is disconnected, dedusting too
-depressurizing the
installation see 4.4.1
Clarification of causation see 6.