Page 10
7.2 Adjustment of Suspension
Picture 2:
Suspension
The following steps have to be done before setting it into operation:
(1) Remove Cape.
Open buckle by pressing the small lever and pull out belt.
Remove cape.
(2) Adjust suspension.
Trim suspension by adjusting screw to your head. Trimming clockwise
suspension gets narrower; trimming anti-clockwise
suspension gets
wider.
(3) Adjust chinstrap.
Adjust chinstrap to correct length by moving the
“buckle”.
(4) Reattach cape.
See 8.4.
The suspension maintains a fixed distance between the head and the helmet. The suspension must
be properly installed and adjusted to provide the protection and comfort for which the helmet is
designed.
8 Maintenance Program / Replacement Parts
The helmet, the hoses, air entry pots and fittings should be checked for dust or debris every day, and
should be cleaned before using.
Periodically inspect and clean the foam filter and screen in the alternate air control valve.
Adjusting screw:
clockwise
narrower,
anti-clockwise
wider
“Buckle“
chinstrap
Holder for sus-
pension
Clip
