SUPERVISOR CONTROLS
62
Tennant T500 (01-2017)
3. Press the Operator button to add an Operator
mode profile or press the Supervisor button to add
an additional supervisor mode profile (Figure 160).
Note: The machine's default supervisor profile can not
be deleted from profile list.
FIG. 160
4. Enter the name of the new user profile then press
the green enter button (Figure 161).
FIG. 161
5. Assign a login code for the new user profile then
press the green enter button (Figure 162). The new
login code can be any combination of numbers
ranging from 3 to 8 digits in length.
FIG. 162
6. Select the controls the new user should only have
access to use (Figure 163). Green represents
unlocked controls and gray represents locked
controls. Press the flashing save button to save
new profile.
FIG. 163
7. The new user profile is now saved to the operator
profile list as shown (Figure 164). Multiple Operator
and Supervisor user profiles can be added. Press
the back arrow to return to the previous screen to
add more user profiles.
FIG. 164
8. To enable the login screen at start up (Figure 165),
see Enabling the Login.
FIG. 165
