MAINTENANCE
38
Tennant T500 (01-2017)
MACHINE MAINTENANCE
To keep the machine in good working condition, simply
perform the following maintenance procedures.
FOR SAFETY: Before leaving or servicing machine,
stop on level surface, turn off machine, remove key
and set parking brake if equipped.
FOR SAFETY: When servicing machine wear
personal protection equipment as needed. All
repairs must be performed by trained personnel
AFTER DAILY USE
1. Drain and rinse out the recovery tank (Figure 94).
See DRAINING TANKS.
FIG. 94
If machine is equipped the spray nozzle option, use
spray nozzle to rinse out recovery tank (Figure 95). If
cleaning detergent was added to solution tank, do not
use spray nozzle for rinsing proposes.
FOR SAFETY: When servicing machine, do not
power spray or hose off machine. Electrical
malfunction may occur. Use damp cloth.
FIG. 95
2. Remove the debris tray and empty (Figure 96).
FIG. 96
3.
Remove and clean the float shut-off screen (Figure 97).
FIG. 97
4. Drain and rinse out the solution tank (Figure 98).
FIG. 98
5. Disk scrub head - Turn pad over or replace when
worn (Figure 99).
FIG. 99
