SUPERVISOR CONTROLS
Tennant T500 (01-2017)
61
4. The supervisor mode home screen will appear
(Figure 156). Press the machine settings button.
FIG. 156
5. The machine's setting screen provides access to
the following menu (Figure 157).
FIG. 157
Video help
- Use to view specific operation
and maintenance procedures.
Add/Edit Profiles
- Use to add/edit user
profiles for machine use.
Battery Type
- Use to configure the machine
for different battery types. See BATTERIES.
Enable Login
- Use to activate a required
login code at machine start up to operate machine.
Calibrate Touch
- Use this to recalibrate the
touch screen if the touch points become
misaligned.
Factory Reset
- Resets the supervisor login
code back to the factory default code “1234”,
removes user profiles and resets any custom
preset zone control buttons back to the factory
preset zones.
To Add/Edit User Profiles
1.
Press the Add/Edit Profiles button to enter a new
user profile (Figure 158).
FIG. 158
2. Press the Add Profile button to add a new user
profile (Figure 159).
FIG. 159
Use the edit, copy and delete profile buttons to
manage the current user profiles.
Press to edit an existing user profile
Press to copy an existing user profile
Press to delete a user profile
