Apex Tool Group
P2291BA | 2020-05
49
14
EN
14 Service
Recalibration
At delivery, model-specific calibration data is stored in the
integrated fastening electronics system of your
Cleco
tool.
If service is required to change the torque transducer, the
screw electronic system or if a recalibration is required,
please send the
Cleco
tool to
Sales & Service Center
. This
will ensure that after the service work, any required calibra-
tion data update is carried out properly.
15 Disposal
Injuries and environmental damage from improper dis-
posal.
Components and auxiliary materials of the tool pose
risks to the health and the environment.
Catch auxiliary materials (oils, greases) when drained
and dispose of them properly.
Separate the components of the packing and segre-
gate the different materials before disposing of them.
Follow the locally applicable regulations.
If repair is required send the complete
47BA to
Sales & Service Center
. Repairs
on the gears and angle attachment are
only permitted by Apex Tool Group autho-
rized personnel. If the tool is opened, the
warranty is voided.
Observe generally valid disposal guide-
lines such as, in Germany, the Electrical
and Electronic Equipment Act (ElektroG)
and the Battery Act (BattG).
Wasted rechargeable batteries must
be disposed of. Return the tool and
defective / power supplies to your
company collection facility or to
Sales
& Service Center
.