Page 16
PL12EN-48ET
02/15/2013
Cleco
®
First Operation
6
First operation
6.1
Putting into use
Ú
Make sure the tool cable is securely attached to the tool and controller.
Ú
Make sure controller is powered on and properly programmed (refer to controller manual)
Ú
Make sure the reverse ring is in the correct position.
Ú
Place the socket on the application and depress the switch actuator to start the rundown.
Ú
When the tool shuts off, release the switch actuator.
Ú
Remove the tool from the application.
