Page 6
PL12EN-48ET
02/15/2013
Cleco
®
Safety
1
Safety
1.1
Warnings and notes
Warning notes are identified by a signal word and a pictogram.
The signal word indicates the severity and probability of the impending danger.
•
The pictogram indicates the type of danger.
•
---------------------------------------------------------------------------------------------------------------------------------------
WARNING
identifies a potentially
hazardous
situation which, if not avoided, may result in serious
injury.
---------------------------------------------------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------------------------------------------
CAUTION
identifies a potentially
hazardous
situation which, if not avoided, may result in minor or
moderate injury or property and environmental damage.
---------------------------------------------------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------------------------------------------
NOTE
identifies general information which may include application tips or useful information but no
hazardous situations.
---------------------------------------------------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------------------------------------------
Important information that must be read and understood by all personnel installing, operating or
maintaining this equipment.
---------------------------------------------------------------------------------------------------------------------------------------
1.2
Basic requirements for safe working practices
All personnel involved with the installation, operation or maintenance of these tools must read and
understand all safety instructions contained in this manual. Failure to comply with these instructions
could result in serious injury or property damage.
These safety instructions are not intended to be all inclusive. Study and comply with all applicable
National, State and Local regulations.
---------------------------------------------------------------------------------------------------------------------------------------
Work Area:
Ú
Ensure there is enough space in the work area.
Ú
Keep the work area clean.
Ú
Keep the work area well ventilated.
Personnel Safety:
Ú
Inspect the power cable for damage.
Ú
Make sure the power cable is securely attached to the tool.
Ú
Ensure a secure standing position and maintain balance.
Ú
Make sure the throttle is positioned relative to the head so the throttle will not become wedged
against an adjacent object in the ON position due to torque reaction.
Ú
If the tool is to be reversed, locate the throttle in a neutral position to prevent entrapment.
