Parameter
Function
Region
•
There are six levels. The sixth level has the highest sensitivity.
•
Region: If you select motion detection type, you can click this button
to set motion detection zone. The interface is shown as Figure
7-42. There are PAL 22X18/NTSC 22X15 zones. Right click mouse
you can go to full-screen display mode. Do remember clicking OK
button to save your motion detection zone setup.
Period
•
Motion detection function becomes activated in the specified
periods.
•
There are six periods in one day. Please draw a circle to enable
corresponding period.
•
Select date. If you do not select, current setup applies to today only.
You can select all week column to apply to the whole week.
•
Click OK button, system goes back to motion detection interface;
please click save button to exit.
Alarm
System can upload the alarm signal to the centre (Including alarm
upload
centre.
Record
System auto activates motion detection channel (multiple choices) to
channel
record once alarm occurs (working with motion detection function).
Please note you need to go to Chapter 4.4 Schedule to set motion
detection record period and go to chapter 4.2 Record to set current
period as auto record.
Record
System can delay the record for specified time after alarm ended. The
latch
value ranges from 10s to 300s.
If you enabled this function, System can send out email to alert you
when alarm occurs and ends.
Tour
•
Display the selected video in local monitor window.
•
Tour interval and tour mode are set in DVR local menu (chapter
5.3.9 Display )
PTZ
•
Here you can set PTZ movement when alarm occurs. Such as go to
Activation
preset x when there is an alarm.
Capture
You need to input capture channel number so that system can backup
motion detection snapshot file.
Buzzer
Once you check the box here, the buzzer beeps when an alarm
occurred.
Matrix
Please note this function is valid in motion detect mode.
Enable
Check the box here to enable video matrix function. Right now system
supports one-
channel tour function. System takes “first come and first
serve” principle to deal with the activated tour. System will process the
new tour when a new alarm occurs after previous alarm ended.
Otherwise it restores the previous output status before the alarm
activation.
Copy
It is a shortcut menu button. You can copy current channel setup to
one or more (all) channels.
Save
You can click save button after you complete setup for one channel,
or you can complete the whole setups and then click save button.
Refresh
Click this button to get device latest configuration information.
7.5.2.6 PTZ
103
