CLEARSPAN
™
STORAGE MASTER
26
PB02580R6N1D Revision date: 03.22.19
Base Rail of End Wall
If a baseboard was not used
when the building was erected,
attach the end wall base rail
using alternative methods.
See the End Wall Diagram–Back
located in the Quick Start Guide
for one alternative using the
104643 middle connector.
Consult a professional building
contractor if needed.
Rafter
Customer-Supplied
Baseboard
Angled
Bracket
QH1330
NOTE:
Consult the End Frame diagrams in the Quick
Start section for connection details. Cut the 1.5" x 1.5"
square tubes to length as needed. Secure each tube
splice using Tek screws. Install the screws in a position
that will not interfere with the installation of additional
end frame components or the end panels.
6. Measure the pedestrian door that shipped with the
building and frame the opening accordingly.
ATTENTION:
Depending on dimensions and spacing,
it may be necessary to first assemble the frame and
door and then attach the assembly to the end wall
frame between the overhead door frames. Assistance
is required.
7. After installing the end framing for the first end wall,
consult the End Frame diagram for the back end wall
and frame that end wall.
8. With both end walls assembled, continue with the
instructions that follow.
END WALL INSTALLATION (CONTINUED)
*Actual components differ.
