The following graphics and photos will help you identify
the different parts and show you how they are used. (Not
all parts are shown.)
Cross Connector
securing a purlin (small pipe) to the
rafter assembly.
Band Clamp
secures the 104074 connector to the rafter
and end wall frame.
Ground post shown above. Baseboard is not used for all
greenhouse models. Diagram is for illustration only.
Fabric Clip
is used to secure the end panels and roll-up
side panel (if equipped) to the cover conduit (if needed).
It is secured using the Tek screw.
QH1330 Bracket
Pictorial Parts Guide
Not all parts are shown.
Visit www.ClearSpan.com for additional products and customer assistance.
4 of 24