•
Purlin: The pipe assembly that runs perpendicular to
the rafters or framework that supports the main
cover. Purlins are found on the sides and roof areas
of the assembled frame, are evenly spaced, and
typically run from the front to the back of the shelter.
•
Plain or Straight Pipe: A term used to describe a
pipe that has the same diameter throughout its
entire length.
•
Strut: A strut is usually a length of pipe with two
flattened ends and is used for diagonal bracing of
the shelter frame. A strut is typically secured to the
framework by special brackets and bolts. Struts are
typically found on longer shelters.
•
Swaged End or Swaged Pipe: The term "swaged"
refers to the tapered end of the pipe. Swaged ends
of a pipe can be inserted into couplers and the
straight ends of other pipes.
•
Tek Screw: A self-tapping fastener used to secure
pipe joints and to fasten brackets to rafters.
REQUIRED TOOLS
The following list identifies the main tools needed to
assemble the shelter. Additional tools and supports may
be needed depending on the structure, location, and
application.
•
Tape measure or measuring device
•
Marker to mark locations on the pipes
•
Variable speed drill and impact driver (cordless with
extra batteries works best)
•
Metal-cutting saw
•
Wrenches and impact socket set, or an adjustable
wrench
•
Scissors, utility knife, tin snips
•
Hammers and gloves
•
Adjustable pliers and self-locking pliers
•
Ladders, work platforms, and other machinery for
lifting designed to work safely at the height of the
building
•
Rope/cable for cover installation and wood blocks
for rafter assembly
UNPACK AND IDENTIFY PARTS
The following steps will ensure that you have all the
necessary parts
before
you begin to assemble the
shelter.
1. Unpack the contents of the box and place them
where you can easily inventory the shipment. Refer
to the Bill of Materials/Spec Sheets.
2. Verify that all parts listed on the Bill of
Materials/Spec Sheets are present. If anything is
missing or you have questions, consult the Pictorial
Parts Guide for clarification, or contact customer
service at 1-800-245-9881.
NOTE:
At this time, you do not need to open the plastic
bags containing the fasteners and clamps.
Space below is reserved for customer notes.
Visit www.ClearSpan.com for additional products and customer assistance.
3 of 24