Aavelin User Manual
19
Adding Content” chapter for further details.
Connect the Power
Once you are sure everything is properly connected,
connect the power cable to the rear of the Aavelin
unit and then plug it into a power outlet on a surge
protector or battery backup unit. Plugging the
Aavelin directly into a wall socket is not
recommended.
⌧
Ensure that the power standard switch (115V / 230V) is
set to the correct voltage for your country. Damage
could result if the switch is not set properly.
Starting the Unit
The Aavelin unit has a “soft” power switch. When you plug the unit in, it will
return to its last power setting, which may have been “on” or “off”.
Normally, the unit should be left on all the time, but if you need to turn off the
power (for example to connect expansion devices or to ship the unit), press and
hold the power button on the front of the case for 4-6 seconds. The unit will
shut down, and then you may unplug the power cable.
Turn the unit on by connecting the power and momentarily pressing the power
switch on the front of the unit
The Aavelin’s boot process can take up to 60 seconds. During this time, the
screen may be black (if using Composite or S-Video output) or a series of boot
screens will be displayed (VGA only).
After the boot process is complete, the Aavelin will begin playing pages. If this
is the first time your Aavelin unit has been started, it will play a demonstration
project. Otherwise, it will play the default project last published from your PC.
Having successfully reached this stage, your unit is ready to configure. Follow
the steps below under “Configure the Aavelin Unit”.
Summary of Contents for magicbox aavelin
Page 2: ... 2 Aavelin User Manual ...
Page 10: ... 10 Aave ...
