Clearfield FieldSmart FDP Installation Manual Download Page 4

Page: 4 / 17

Direct: 763.476.6866 • National: 800.422.2537 • www.SeeClearfield.com • [email protected]

FieldSmart FDP Indoor/Outdoor Wall Boxes

Installation Manual

_________________________________________________________

Manual 022793 REV A - March 2022

Mounting the Wall Box

Unpack the wall box from shipping container and make sure to check for small items that may be included. These would be

bagged separately and included in the shipping container.

The wall box is installed via the 2 slots located in the top and bottom of the enclosure. Hold the panel up to the mounting

surface and mark the hole locations with a marker.

Note:

A level may be used to ensure that the panel is mounted straight.

Pilot holes can then be drilled at each mark. Using appropriate fasteners for the material, attach the panel to the surface.

FDP Mini Wall Box

FieldSmart Deploy Reel

FDP Small Wall Box

Clearview xPAK

FDP Large Mid-Span Wall Box

Clearview Blue Cassette

FDP Large Wall Box

Clearview Blue Cassette

Summary of Contents for FieldSmart FDP


















Search results

Summary of Contents for FieldSmart FDP

Reviews:

Related manuals for FieldSmart FDP

Brands by name

Popular brands

Clearfield FieldSmart FDP, Installation Manual

Search results

Summary of Contents for FieldSmart FDP

Reviews:

Related manuals for FieldSmart FDP

Brands by name

Popular brands