12
“Winterizing” Instructions
2)
Hook your 150 to an air supply:
a. Use the standard compressor supply air hookup on front panel.
b. Use a small shop compressor (max 150psi). Remove left side
panel. This gives access to the internal air line going to the 150s
pump and controls. Be sure not to use the “PSI Supply Gauge” line
coming off the same “T” fitting. (Picture below shows a push fitting on
a shop air trigger gun with a 1/8” female port Farrow pt# 18.6.m.svel)
3)
Disconnect the pumps “winterizing” line from the water supply
tank line. The quick connection is behind the back panel. Take the
portion leading to the water pump (right) and place it into a gallon
of windshield washer fluid/deicer. (Do not use extremely
corrosive materials as this can affect and/or damage your water
pump and other components on the machine—i.e. auto anti-freeze)
