Page / Seite 12
© clearaudio
electronic GmbH, 2021-07
User manual / Bedienungsanleitung
8. Points to note
8.1 Waste fluid tank:
The waste fluid tank has a capacity of approx. 0.5 litres. We recommend regular draining of the
tank, to avoid any damage. Please note that with intensive use waste fluid can evaporate completely
leaving residue within the waste tank.
To empty the waste fluid tank:
1.
On the back panel you will find the drain tube, which can be pulled out (see Pic. 2, No. 10, page
7).
2. Remove the sealing plug from the drain tube.
3. To empty the waste fluid tank completely, tilt the
double matrix professional SONIC
about 45° to
the rear. Once emptied, be sure to reseal the drain tube again.
CAUTI ON
:
Do not re-use waste cleaning fluid. This could damage your machine.
8.2 Cleaning the fluid reservoir:
The cleaning fluid reservoir has a capacity of approx. 0.4 litres. We recommend that you fill the tank
only with
Clearaudio
cleaning fluids (available at www.analogshop.de) to receive the best cleaning
results.
To empty the fluid reservoir tank (to ship the unit or to switch to another liquid), close the suction
unit and disconnect the upper supply tube.
Insert the end of the disconnected supply tube into a container, squeeze the lower supply tube and
hold the “LI QUI D
” button pressed. Now the unit will start to pump the fluid.
We recommend a second person for help.
Please note:
I f you won’t be using the
double matrix professional SONI C
for more than a week, we
suggest that you drain the remaining fluid from the cleaning fluid reservoir.
CAUTI ON:
Never use foaming or corrosive liquids, or water.
This could cause serious damage to your machine and
may void your warranty.
Pic. 5:
Warning
