Made in Germany
Page / Seite 9
User manual / Bedienungsanleitung
Pic. 3:
Turning the antistaic unit
5.3 Automatic and manual cleaning
• Antistatic
brush
The antistatic brush arm is used to discharge any static that is
generated during the drying process. After completion of the
automatic programs or manual cleaning, the dry record should
pass the antistatic brush at least for 2-3 full rotations. Turn the
antistatic arm above the record to the outer point. The record will
start to turn and the constructed static will derived.
The antistatic function can only be activated with opened suction
arm.
After 2-3 full rotations, turn the antistatic arm back to the start position. The rotation of the record
ends automatically.
5.4
LED
level
indicator
Shows the level of cleaning fluid currently in the reservoir (0% to 100%).
6. I nitial start-up
6.1 Filling the cleaning fluid reservoir
Place the funnel supplied into the filling hole (Pic. 2, No. 11, page 7) and fill the fluid reservoir with
the cleaning fluid provided (max. 0.4l).
Pay attention to the LED level indicator so as not to over-fill. For effective cleaning we recommend
using only
Clearaudio
cleaning fluids (available at www.analogshop.de).
6.2 Opening the cleaning and vacuum arm and placing the record
Lift the upper cleaning arm and swing it to the left to open the cleaning and vacuum assembly.
Turn the knob of the Seal record clamp anticlockwise to release the clamp then place the record to
be cleaned on the label-sized platter. Now put the Seal record clamp back on the spindle and press
down gently while rotating the knob clockwise to secure the record in position and create a seal to
protect the record label from fluid damage.
Closing the cleaning and vacuum unit
Now you can swing the upper cleaning arm to the right to close the cleaning and vacuum assembly.
6.3 Automatic cleaning
The new features of the
double matrix professional SONIC
“AUTO”, “SUPERCLEAN” and “ECO MODE”
provide fully automatic and efficient cleaning (see function 5.1, page 8). You only have to manually
activate the antistatic brush.
