Page / Seite 10
© clearaudio
electronic GmbH, 2021-07
User manual / Bedienungsanleitung
6.4 Manual cleaning
To set your own parameters for the cleaning process manually:
•
After you have placed and fixed the record with the Seal record clamp, close the cleaning and
vacuum assembly.
• Press the “POWER” button to start the sonic cleaning function and rotation of the record.
• Press the “LI QUI D
” button to apply cleaning fluid to the record. Holding down the button for
longer applies more fluid. Adjust this according to the desired quantity of cleaning fluid.
•
After about 3 or 4 rotations, change the platter direction by pressing the “
PLATTER” button. We
recommend 3 or 4 turns in each direction. By turning the “
PLATTER SPEED” knob you can vary
the rotational speed to further fine tune the cleaning process.
• Once you are happy with the cleaning, press the “VACUUM” button. This will stop the sonic
cleaning function and start the vacuum drying process. After about 3 or 4 rotations, when the
record is visibly dry, switch off the suction by pressing the “
VACUUM” button again.
• Press the “POWER” button to stop the record rotation.
•
Open the suction arm. Now start the antistatic function (see 5.3, page 9). After completion of the
antistatic function the manual cleaning is complete and you can remove your record.
