12 CV1800 and CVMAX Installation Guide
© Clear Vue Cyclones 2018
6. Stand the motor on end, with the shaft facing up towards the ceiling.
7. Attach the motor to the hanger plate assembly:
a. Turn the hanger plate assembly over so
that the hanger plate is down and set it
on the motor. Be sure the holes on the
motor plate align with those on the face
of the motor.
8. Install (1)
3
∕
8
” x 1-¼” bolt through each of the
holes on the motor plate into the holes on the
face of the motor, using (1)
3
∕
8
” lock washer and
(1)
3
∕
8
” flat washers per bolt.
9. Tighten each motor bolt securely.
Completed Hanger Plate & Motor Assembly
Do NOT turn the motor on until the system is completely
assembled, including the collection drum. Doing so may cause
the circuit breaker to trip, physical damage to the system and/or
bodily harm.
