15 CV1450/1700/1950 Installation Guide
© Clear Vue Cyclones 2022
Assembling the 90° Filter Transition
(filtered systems only)
1. Begin by inserting the outer and inner plastic sides into the
grooves of the side plates to form the transition.
2.
Slip the assembled sides of the transition into the slot of the
round end plate
a.
The straight ends of the two MDF side plates should be
seated into the groove of end plate.
3. Secure the filter transition end plate:
a.
Drill (4) small pilot holes in the bottom of
the round end plate.
b.
Attach the transition end plate using (4) #6
x 1-¼” sheet rock screws.
Do not caulk the seams of the 90° Filter Transition until it is installed on the blower
housing.
