15
14
How to use
Digimax RF with under the chin headset receiver
1. Switch your sound,rce on (e.g. TV).
2. Adjust the volume level control
1
initially to a low volume to protect your
hearing. The volume increases when you turn the dial toward “5” and it
decreases when you turn the dial in the direction of “0”.
3. Put the headset on. The headset switches on automatically when you
spread the arms. The green LED
4
indicates that the receiver is
switched on.
4. The blue LED bar
21
in the transmitter is illuminated as soon as the
transmitter has contact and transmits to the receiver.
5. Set the desired volume
1
.
6. When you remove the headphones they will switch off automatically. We
recommend that you put the headphones back into the transmitter cradle
when not in use, to ensure that the battery is always charged.
Digimax RF neckloop
CAUTION: People using this product who have a heart pacemaker,
should contact their physician or the manufacturer of the
pacemaker to ensure that the pacemaker is not subject to
interference.
1. Switch your sound source on (e.g. TV), and switch your hearing aids to
t-coil setting.
2. Adjust the volume level control
9
initially to a low volume to protect your
hearing. The volume increases when you turn the dial toward “5” and it
decreases when you turn the dial in the direction of “0”.
3. Ensure that the neckloop lock has been closed completely. The neckloop
lock is used to comfortably wear the device and to minimize accidents.
4. The receiver will be switched on and off by using the ON/OFF switch
8
on the back. Caution: Always switch the receiver off after use to avoid
discharging the battery. The green LED
13
on the receiver indicates that
the receiver is switched on.
5. The blue LED bar
21
on the transmitter is illuminated as soon as the
transmitter has contact and transmits to the receiver.
6. Set the desired volume.
7. Switch the receiver off after use. We recommend that you put the
neckloop receiver back into the transmitter cradle when not in use, to
ensure that the battery is always charged.
Connecting the transmitter to the power supply
Connect the provided power supply to the transmitter labeled “DC12V”. Plug
the power supply into a non-switched electrical outlet.
Charge the receiver with the installed battery for eight (8) hours before using
the device for the first time.
