Clear TV Digimax RF, Operating Instructions Manual

Page: 5 / 24

)
)
)
)
DC 12V
USB AUDIO MIC CONNECT
USB
AUDIO
MIC
AUDIO OUT
L R
DC 12V
USB AUDIO MIC CONNECT
USB
AUDIO
MIC
28
11 10
Congratulations on the purchase of your Digimax RF system. You have
purchased a reliable state-of-the-art device. Please review these operating
instructions carefully to ensure that you set up the device correctly and that
you are familiar with all functions of the device.
Set up / connections
Turn off the sound source before connecting the transmitter.
Plug the provided audio connection cable 28 into the green “Audio” female
connector 25 of the transmitter.
Several options exist to connect the Digimax RF to a sound source (e.g. TV,
computer, etc.).
Please check the output connection options of your sound source.
– RCA female connector
– Headphone connection
– External microphone
– USB connection (e.g. computer)
– S/PDIF digital output–when using digital to analog converter
(DAC). If your TV has RCA audio outputs, the included S/PDIF
converter is not necessary.
25
28
Preferred Connections
Connecting the transmitter to an RCA female jack
Connect the adapter cable with the RCA plugs 29 to the audio connection
cable 28 .
Plug the RCA plugs into the RCA connection of your sound source.
• Ensure that the white connection is connected to the white connection of
your sound source.
• Ensure that the red connection is connected to the red connection of your
sound source.
If your TV has RCA audio outputs, the included S/PDIF converter is not
necessary.
Connecting the transmitter to a headphone jack
Plug the audio connection cable 28 into the headphone jack of your sound
source.
You may need to use the 1/4” (6.5 mm) headphone plug adapter (included)
to connect to your sound source. Set the volume of your sound source to a
comfortable level.
28
29