background image

  Never touch the device, the mains cord and the mains adapter with wet hands when these 

components are connected to the mains supply. 

  Turn the device off and pull the mains adapter out of the socket  

             – if you stop working with it, 
             – before a storm, 
             – if an error or fault occurs during operation, 
             – if foreign objects penetrate the device. 

  Do not use the device if it is still connected to the mains adapter or to the power source. 

  Always pull on the mains adapter and never on the mains cord. 

  Only use the device in enclosed areas. 

  Do not use the device in rooms containing easily flammable dust or toxic and explosive 

vapours. 

  Do not operate the device in very moist environment or in the vicinity of flammable material. 

  For your own safety, always check the device for damages prior to using it. Only use the 

device if the device, the rechargeable battery, mains cord and the plug do not exhibit any 
damages! 

 

Danger from Rechargeable Batteries 

  Rechargeable batteries can be deadly if swallowed. Seek medical attention immediately if a 

battery has been swallowed. 

  Before inserting the battery pack, check whether the contacts are clean and clean them if 

necessary. 

  Use only the battery type specified in the technical data. 

  If the battery has leaked, do not allow your skin, eyes and mucous membranes to come into 

contact with the battery acid. If you touch battery acid, rinse the affected sites with abundant 
fresh water immediately and contact a doctor as soon as possible. 

  Remove a leaking battery from the device immediately. Clean the contacts before inserting a 

new battery. 

  The battery must not be taken apart, thrown into a fire, immersed in liquids or short circuited. 

19 EN 

Avoiding damage to materials, property and the device 

  The device should only be used when it is fully and correctly assembled. The collecting 

container, filter, insert and seals must be inserted and must not be damaged! If the dirt were 
to get inside the device, this could damage the motor. 

  Make sure that the mains cord does not get pinched, kinked or laid over sharp edges and 

does not come into contact with hot surfaces. 

  Maintain adequate distance to heat sources such as stoves or ovens to prevent damage to 

the device. Do not place any open flames, e.g. burning candles, in the direct vicinity of the 
device, cord, rechargeable battery and mains adapter. 

  Do not allow the device to fall and do not subject it to strong percussions. 

  Do not pull or carry the device by the cord of the mains adapter. 

  Do not subject the device to extreme temperatures, severe changes in temperature, moisture, 

wetness or direct sunlight. 

  Do not use any corrosive or abrasive cleaning agents to clean the device. They could damage 

the surface. 

  Only use the device if it has been completely and correctly assembled! The dust bin and filter 

must be in place. The filters may not be damaged! 

  Do not insert anything in the openings / nozzles of the device and make sure that they are not 

plugged. 

  Empty the dust bin after every use. The filters must also be cleaned regularly to prevent the 

motor from being overloaded. 

  Only use the accessories recommended by the manufacturer. 

EN 20 

 
 
 

Summary of Contents for VP003W











Reviews: