Charging Up the Battery
CAUTION!
•
Risk of short-circuits! Do not insert any conducting objects (e.g. screwdrivers or similar items)
into the charging socket of the main unit.
•
The battery may only be charged using the charger which is supplied with the device. Do not
use the charger to charge up other batteries.
•
Remove the mains plug of the charger from the plug socket if you are not using it for a
prolonged period
.
•
It is essential that you charge up the battery fully before you first use the device in
order to achieve the maximum charging capacity. The first charge will last for 12-15
hours.
1. First connect the charger to the socket of the main unit and then to a properly installed, easily
accessible plug socket. The control lamp on the handle of the main unit will then light up.
2. Allow the battery of the device to charge up for approx. 12 - 15 hours on the first charge and then
for approx. 5 hours every charge after. The control lamp lights up when the device is connected to the
mains power.
3. Disconnect the charger from the mains power and then from the device. Store it out of the reach of
children.
Assembly
Hand-Held Vacuum / Floor Vacuum Cleaner Conversion
You can convert the hand-held vacuum cleaner into a floor vacuum cleaner by attaching the handle
rod to the main unit.
1. Before initial use, plug the two parts of the handle rod together as far as the limit will allow. (The
handle rod will then not need to be taken apart again).
2. Insert the connection piece of the handle rod into the opening on the main unit.
3. Attach the floor nozzle.
4. To remove the handle rod, press the locking lug of the connection piece and pull the handle rod up
and out of the device as you do so.
