13
CLEANING BRUSH BAR ROLLER
REMOVING THE BRUSH BAR ROLLER
1. Remove the five screws that hold the brush roller
base plate in place as shown.
2. Remove the brush bar roller base plate by lifting it
up.
3. Remove the brush bar roller by lifting the right
side out of the roller guides as shown.
4. Remove the brush bar roller from the belt
assembly by pulling the belt towards you and sliding
the brush
bar out.
5. Remove all debris from the brush bar roller.
NOTE: When the cleaning of the brush bar no
longer restores vacuum cleaner suction to full power,
check for clogs or replace the filters.
