12
CLEANING DUST BIN
1. Remove the dust bin.
2. Open the dust bin filter lid, located on the top of
the dust bin.
3. Remove the dust bin foam filter from the dust bin.
4. Push the release button, open the dust bin and
clean all parts of the dust bin.
5. Hand wash the bin foam filter. Allow filter to dry 24
hours before putting back into vacuum cleaner.
NOTE: When the cleaning of the filter no longer
restores vacuum cleaner suction to full power,
replace the filter.
DO NOT operate without filter installed.
DO NOT wash dust bin in the dishwasher.
DO NOT install filter damp.
CAUTION:
•
Do not attempt to dry filter with a hair dryer or
by placing in clothes dryer. Hot air may cause
the filters to warp.
•
It is not necessary to wash the dust bin or filter
after each vacuum use.
6. Install the foam bin filter.
7. Close the dust bin and reattach as shown.
