25
GB
Cleaning and Storage
CAUTION!
• Empty the dust container when the MAX mark has been reached and clean the
fi
lter
regularly to prevent overheating of the motor.
• Keep the motor unit, the charger cable and the charger away from water or other liq-
uids to avoid electric shocks. Make sure that no water gets into the motor unit during
cleaning. Only the
fi
lter and the dust container may be cleaned with water. However,
they must be completely dry before they are put back into the device.
• The
fi
lter, the dry cleaning brush and the micro
fi
bre roller are not machine-washable,
dishwasher-safe or suitable for tumble drying! Only ever dry the
fi
lter, the dry cleaning
brush and the micro
fi
bre roller in the air, and never use a hair dryer to do so.
• Do not use any sharp or abrasive cleaning agents or cleaning pads to clean the de-
vice. These could damage the surfaces.
• Clean the housing if necessary using a damp, soft cloth. Dry it with a soft cloth.
• Remove hair and
fl
uff from the nozzles at regular intervals.
• Store the vacuum cleaner and all accessories in a cool, dry indoor room out of the
reach of children and animals.
The
fi
lter may lose some of its colour over time. This is normal and
does not have any adverse effect on function. However, if it is damaged
or worn, it must be replaced. You can order another new
fi
lter at
www.service-shopping.de.
Emptying the Collecting Container and Cleaning the Filter
1. Switch off the device.
2. Press the release button to remove the dust container and
pull the dust container away from the motor unit.
3. Take the
fi
lter (1) and the
fi
lter insert (2) out of the dust
container (3).
4. If you have sucked up dry dirt, empty the dust container into a rubbish bin. Tap the
fi
lter insert and
fi
lter out over the rubbish bin. If there is wet dirt in the collecting con-
tainer, rinse the dust container, the
fi
lter insert and the
fi
lter under running water.
5. Let all parts dry completely in the air before you put them back together.
CAUTION:
Never re-insert the
fi
lter and insert if they are still damp.
The device is assembled
in the reverse order.
