GB
24
Floor Cleaner
1. Make sure that the cleaning foot, the motor unit with dust container and the clean-
ing agent container has been correctly attached to the device (see the "Assembly"
chapter).
2. Use the switch for changing between the wet/dry function
to set whether you want to clean the
fl
oor dry (front switch
position (1)) or want to clean the
fl
oor wet with cleaning
agent (rear switch position (2)).
3. Press the On/Off switch on the handle to switch on the
fl
oor cleaner.
4. Guide the cleaning foot over the surface to be cleaned.
5. In order to spray cleaning agent out of the spray nozzle on
the cleaning foot, press the spray trigger on the handle.
Make sure that you have switched on the wet function
if you press the spray trigger!
6. Press the On/Off switch to switch off the vacuum cleaner.
7. To ensure optimum performance of the device, you should empty the dust container
by no later than when the MAX mark has been reached and clean the dust
fi
lter
regularly (see the "Cleaning and Storage" chapter).
Handheld Vacuum Cleaner
1. Make sure that the accessory nozzle and the dust container have been correctly
attached to the device (see the "Assembly" chapter).
2. Press the On/Off switch on the motor unit to switch on the
handheld vacuum cleaner.
3. Guide the nozzle over the surface to be cleaned.
4. Press the On/Off switch on the motor unit again to switch
off the handheld vacuum cleaner.
5. To ensure optimum performance of the device, you should empty the dust container
by no later than when the MAX mark has been reached and clean the dust
fi
lter
regularly (see the "Cleaning and Storage" chapter).
1
2
