EN
14
NOTICE – Risk of Damage to
Material and Property
■
Do not use the device if there is
visible damage to the device or to the
component parts of the device.
■
In the event of damage / faults, switch
the device off immediately.
■
The device should only be used if it
has been fully and correctly assem
bled!
The tanks and filters
must be
inserted and must not be damaged!
If
dirt were to get inside the motor unit,
this could damage the motor.
■
Do not place heavy objects on the
device and the component parts of
the device.
■
Make sure that the connecting cable is
not squashed, bent or laid over sharp
edges and does not come into contact
with hot surfaces.
■
When you pull the mains plug out of
the plug socket, always pull on the
mains plug and never the mains cable!
■
Use only original accessories from the
manufacturer in order to guarantee
that there is no interference that may
prevent the device from working and
to avoid possible damage.
■
Store only in closed rooms.
■
Use and store the device at room
temperature, do not expose it to
extreme temperatures or temperature
fluctuations.
■
Protect the device from heat sources,
flames, persistent moisture and
impacts.
■
Make sure that the device does not
tip over so that no water can run out
of the tanks.
ATTACHING AND
DETACHING ACCESSORIES
Handle Holder
The handle holder (
10
) can be used to
place the handle (
6
) of the hose when the
device is not being used.
L
The handle holder must be
attached to the device before it is
first used.
•
Attaching:
Slide the handle holder
from above into the fixture on the
front of the device (
Picture B
).
Wind the suction hose clockwise
around the device so that the handle
can be placed in it.
•
Detaching:
Unwind the suction hose
anticlockwise from the device.
Pull the handle holder up out of the
fixture.
Dirty Water Tank
•
Attaching:
Insert the dirty water
tank (
16
) via the guide rail into the
mount for the dirty water tank (
15
).
You must hear and feel the locking
catch (
18
) engage.
•
Detaching:
Pull the locking catch
away from the device to release the
locking lug.
•
Opening and closing:
To open it, lift
up the closure tab (
17
) on the side
and take off the lid.
When you place on the lid, make sure
that the locking lugs of the lid engage
in the recesses on the water tank and
you feel and hear the closure tab lock
in place.
Summary of Contents for 04982
Page 2: ...B B F F E E A 2 1 17 16 4 5 13 15 3 6 7 8 9 10 11 12 14 18 C C D D...
Page 40: ......
Page 41: ......
Page 42: ......
