20
Indicator light
Common error
Solution
Flashing red
Fan error / overheating / the
dust collector’s lid is not closed
properly
1. Frequent suction can cause the overheating protection of the dust collector to
be triggered. Allow the suction motor to cool down and try again after approx.
30 minutes.
2. Make sure the cover of the suction station is completely closed and seals well.
Also make sure that the robot vacuum cleaner is placed at the dust collector for
charging and that the charging contacts are in contact.
Flashing red
The dust bag is not installed / not
correctly in place
1. Check whether a dust bag is installed. If not, insert a new dust bag.
2. Check that the dust bag is installed correctly and that the sensors of the dust
bag holder detect the bag.
flash
simutane-
ously
Failed to pair / Not paired yet
1. Press and hold the both buttons and on the dust collector simultaneously
for 5 seconds: The dust collector enters into pairing mode, the three indicators
on the dust collector flash green.
2. Press and hold the button for 5 seconds on the robot: The robot enters
pairing mode, the indicators of the robot flash green.
3. Place the robot at the dust collector to charge, and wait till the voice prompt
indicates that the pairing is successful.
Dust collector
The dust collector indicates its current status via the status-LED's on top of the lid:
Summary of Contents for S170 Navi
Page 2: ......
Page 4: ......
Page 107: ...103 センサー ユニバーサルホイール クラッシュセンサー 充電用接点 右ハンドル ローラーブラシカバー サイドブラシ 左ハンドル ローラーブラシ EN DE FR IT ES JP ...
Page 125: ......
