8
Safety instructions
Initial– Start-Up
The Ride-on-Sweeper is delivered as standard
version withou batteries and without charger.
Optional:
The Ride-On-Sweeper can be
delivered with batteries and charger
The Ride-on-Sweeper can be delivered with
hydraulich overhead waste-box emptying
Standard:
Optional:
•
Open the transport packing
•
Remove the complete main cover. Lift the
main cover at the back and secure the open
position by using the support holder.
•
Place the batteries inside the machine
•
Connect the batteries to the power supply
according to the Technical Data and Circuit
diagramm/Wiring plan
•
Close the main cover again and put the
support holder back into position.
•
Mount the side brushes (page 16)
The Ride-On-Sweeper is now functional and
ready for operation.
Drive the Ride-On-Sweeper out of the transport
packing down from the wooden palett by
using the ramp. Make sure to use the
closed ramp. The ramp must be designed
in such a way that not only the front wheel,
but also the rear-drive-wheels can drive
onto, over and down and off the ramp. If these
instructions are not followed then the
mechanical functions of the Ride-On-Sweeper
could be considerably damaged.
•
The Ride-On-Sweeper is equipped with
batteries.
•
Open the transport packing
•
Open the main cover of the machine
•
Secure the open position of the main cover
with the cover support rod. The cover has
drill holes on the underside.
•
Stick the cover support rod into the drill hole
•
Connect the Plus-pole of the battery
•
Close the main cover
•
Mount the side brushes (see page 16)
•
Drive the Ride-On-Sweeper over the ramp
and out of the transport packing. Make sure to
use a closed ramp. The ramp must be designed
in such a way that not only the front wheel, but
also the rear-drive-wheels can drive onto,
over and down and off the ramp. If these
instructions are not followed then the
mechanical functions of the Ride-On-
Sweeper could be considerably
damaged. The Ride-on-Sweeper is now
functionable.
Cleanfix —KS 1100—simply clean
The Ride-On-Sweeper starts only when,
- the battery mains switch (emergency.-Off)
And the start switch with key is in ON–position;
- Someone sits in the driving seat and the
seat contact is activated and additionally the
accelarator pedal is pressed down
If the direction level (forwards/backwards) at
the steering column is in backwards position,
then an acoustic signal is activated. (optional)
The power supply respectively the start
procedure must be interrupted in the following
cases:
Hence, the following is essential:
•
The main cover can only be opened if the
Main switch is in OFF position, i.e. the lever
is turned in OFF position which then allows
free opening.
•
The side covers and other screwed / bolted
machine parts are only allowed to be
removed if the EMERGENCY-OFF switch is
turned to OFF position and the key has
been removed!
25
Cleanfix —KS 1100—simply clean
Errors and Solutions
Error
Possible reason
Solution
Safety fuse of the
Cylindrical brush motor
do not last
Cylindrical brush is blocked and
clogged by ropes, bands, large
objects or other wastes
Dismantle the Cylindrical brush
and clean it.
Safety fuse of the
Side brush motor
do not last
Side brushes are blocked and
clogged by ropes, bands, large
objects or other wastes
Inspect and check the side brushes
and look for function disturbing
parts and wastes.
Safety fuse of the
Vacuum motor/Blower
do not last
The fan wheel is not freely
moveable.
Check the fan wheel and repair the
blockeage.
Safety fuse of the
Drive motor
do not last
The driving wheels are not running
freely
Jack up the Ride-on-Sweeper and
inspect the differential influence on
the wheels and their free move-
ment.
