CleanCraft 7520100, Operating Instructions Manual

Page: 7 / 26

Type plate
Water Pumps | Version 1.02 7
The combination submersible water pumps SDWP 7514
and SDWP 10020 are suitable for pumping clean and
dirty water.
The submersible water pump must not be operated in
potentially explosive environments and the max. permis-
sible temperature of the pumped medium must not ex-
ceed 35 ° C.
Proper use also includes compliance with all information
in this manual.
For structural and technical changes to the special Wa-
ter pump the company Stürmer Maschinen GmbH as-
sumes no liability Claims of any kind due to damage due
to improper use are excluded.
3.1 Improper use
3.2 Residual risks
Even if all safety instructions are observed, and the ma-
chine is put to its intended use, there are still residual
risks, which are listed below:
- Risk of injury of upper and lower limbs while equip-
ment is operating.
- Heat build-up on components can cause burns
and other injuries.
- Danger of fire and explosions in connection with
the absorption of wrong liquids.
- Electrical hazards due to contact with parts and
high voltage (direct contact) or with parts that are
under high voltage due to a defect in the device (in-
direct contact).
4 Type plate
Fig. 2: Type plate SCWP 7514
ATTENTION!
Any change on the Water pump is prohibited. The
change may void the warranty, cause burns and
personal injury, even fatal for the user.
The manufacturer will not be liable for any damage
that the results from failure to follow these instructi-
ons or from the misuse of the equipment to objects
or persons.
WARNING!
Danger in case of misuse!
Misuse of the special Water pump can lead to dan-
gerous situations.
- Only operate the special Water pump in the power
range listed in the technical data.
- Never bypass or override the safety devices.
- Only operate the special Water pump in a techni-
cally perfect condition.
ATTENTION!
The pump is not suitable for pumping salt water, fae-
ces, flammable, corrosive, explosive or other dan-
gerous liquids.
The delivery fluid must not exceed or fall short of the
maximum or minimum temperature specified in the
technical data.
- Do not soak up aggressive cleaning agents as they
could damage the device.
- do not absorb any materials that may damage the
filter elements (e.g., broken glass, metal, etc.).