background image

FILTRATION

FILTRATION

WWW.CLEANCOMFORT.COM

2

INTRODUCTION

IO-AE14-5

INTRODUCTION ................................................. 3

What the Air Cleaner Does .............................................3
Features and Benefits .....................................................3
How It Works ..................................................................3

SPECIFICATIONS ................................................. 4

Components ...................................................................4 
Static Pressure ................................................................5

INSTALLATION ................................................... 5

Location ..........................................................................5
Installation Location With Humidifier .............................6
Installation Location With Air Conditioner .....................6 
Installation Steps ............................................................6
WIRING ...........................................................................7 
System Check ..................................................................7
Operation ........................................................................7

CHECKOUT .......................................................... 8 

CHECKOUT - Visual ..........................................................8
CHECKOUT - Operational ................................................8

MAINTENANCE ................................................... 9

Cell and Prefilter Cleaning ..............................................9
Cleaning the Collector Cells  ...........................................9 
Cleaning the Prefilters ....................................................9

Reinstalling the Cells and Prefilters ..............................10
Replacing the Carbon VOC filters ..................................10 
Maintenance Parts  .......................................................10

TROUBLESHOOTING ........................................ 11

Testing For High Voltage at Power Board ......................11
Measuring High Voltage at Power Board ......................11
Testing Air Proving Switch (APS) .................................. 12
Testing the 24 V Transformer ........................................12
Setting Voltage of Power Board  ...................................13
Testing for Voltage at The Cell ..................................... 13
Testing Cell for Bad Contacts ........................................13
Testing Cell with an Ohmmeter ....................................13

SERVICE ............................................................. 16

Replacing a Performance Light .....................................16
Replacing a Power Board ..............................................16
Replacing the 24 V Transformer ...................................16
Replacing an Air Proving Switch (APS)  .........................17
Removing Power Box  ...................................................17
Replacing a Tungsten Ionizing Wire ..............................17

PARTS LIST ........................................................ 18
LIMITED WARRANTY ........................................ 20

Proprietary Notice 

This document and the information disclosed herein are 

proprietary data of Daikin North America LLC. Neither 

this document nor the information contained herein 

shall be reproduced, used, or disclosed to others without 

the written authorization of Daikin North America LLC, 

except to the extent required for installation or  

maintenance of recipient’s equipment. 

 

Liability Notice 

Daikin North America LLC does not accept any liability 

for installations of air cleaning equipment installed by 

unqualified personnel or the use of parts/components/

filters/equipment that are not authorized or approved  

by Daikin. 

Copyright Notice 

Copyright 2015, Daikin North America LLC  

All rights reserved. 

Our continuing commitment to quality products may  

mean a change in specifications without notice. 

© 2015 DAIKIN NORTH AMERICA LLC 

Houston, Texas • USA

www.cleancomfort.com 

1-800-267-8305 • Fax: 1-416-213-5593

Summary of Contents for AE14-1620-51





















Reviews: