CLEAN BURN CB-1400, Operator'S Manual

Page: 21 / 108

Operator's Manual: Model CB-1400
3-1
SECTION 3: FURNACE ASSEMBLY
Understanding Assembly
Assembling your Clean Burn Furnace includes the following steps:
(1) Installing the Observation Port
(2) Installing the Fan Assembly
(3) Installing the Burner
Clean Burn recommends that you review all assembly procedures before proceeding, paying careful
attention to safety information statements.
Figures 3A and 3B provide a general overview of the
furnace components and their proper assembly and how the unit should look following proper assembly.
Required Tools and Materials
The following tools are required for furnace assembly and should be gathered before starting any procedures:
•
1/4" nut driver
• Medium flat-blade screwdriver
• 9/16" open-end wrench
FIGURE 3A - Overview of Furnace Assembly