Claydon HYBRID M3, Operator'S Manual

Page: 61 / 66

61
I
CARE AND MAINTENANCE
OPERATORS MANUAL - HYBRID - M3, M4, M4R, M4.8 & M6
On the seeding leg, hook the removal tool (supplied) over the top of the share and push the pin down, hit
the top with a hammer to remove the share. Now simply slide the new share up the speed-Loc adaptor and
hit the bottom with a hammer until the locking pin pushes back out.
CHANGING SHARES
EYE PROTECTION AND GLOVES MUST BE WORN
!
CHANGING WEARING PARTS
IMPORTANT
NEVER HIT THE TUNGSTEN CARBIDE TILES WITH A
HAMMER, WEAR GLOVES AND SAFETY GLASSES WHEN
WORKING WITH THE TUNGSTEN CARBIDE PARTS.
NEVER HIT THE LOCKING PIN WITH A HAMMER AND
PUNCH OR ANYTHING SIMILAR AS THIS WILL DAMAGE
THE SPRING.
! !