Claydon HYBRID M3, Operator'S Manual

Page: 50 / 66

H
IN FIELD OPERATION
50 OPERATORS MANUAL - HYBRID - M3, M4, M4R, M4.8 & M6
Step 4: Enter the required rate followed by the button as seen in ‘ Figure 4 ’ .
Note : The ISOCAN system can be programmed for use with up to 4 metering channels. Be careful to set
the correct application rate for the correct metering channel.
Figure 4 - Channel Rate setting option
After pressing a warning screen will pop up to confirm the new maximum forward speed. The
ISOCAN system will now automatically maintain this new application rate irrespective of forward speed.
(within maximum forward speed limits). Please press to dismiss this screen.
You are able to manually override the rate for a selected channel by 5% increments. ‘ Figure 6 ’ shows the
buttons which will allow you to increase or decrease the rate. This can be done to a maximum of plus or
minus 50% from the set target rate.
Figure 6 - Manual override buttons
Figure 7
- Return to target rate button
To return to the target rate simply press the button as seen in ‘ Figure 7 ’.
Note
: Should you require to increase or decrease the set application rate more than 50%, it is advised to
recalibrate the metering unit for the new 50% set application rate.
Application Rate Setting
Figure 5 - Maximum Forward Speed Warning