6.
The properties for the selected interface will appear.
Select and display the properties for
Internet Protocol Version 4 (TCP/IPv4)
.
7.
In the properties dialog, select the option Use the following IP address and enter the
following values:
•
IP Address:
192.168.1.30
•
Subnet mask:
255.255.255.0
•
Default gateway:
192.168.1.1
DNS addresses can be entered later once Internet access is established.
8.
Click OK to close this dialog and close all the other dialogs opened since step (1).
Appendix F: Windows 8 IP Setup
91
Summary of Contents for Wolf W30
