3.5. Connecting Power
This section describes connecting power. As soon as power is applied, the W30 will boot-up and
cOS Core will start.
Important
Please review the electrical safety information in
Chapter 8, Safety Precautions
.
The image below shows the back of the W30. This is divided into four sections secured by screws.
Figure 3.2. Rear view of the Clavister W30
Connecting AC Power
To connect power, follow these steps:
1.
Plug the end of the power cord into the power inlet socket on the W30.
Figure 3.3. W30 Power Switch and Power Inlet Socket
2.
Plug the other end of the power cord into a grounded power outlet.
3.
Power is controlled by a rocker switch situated to the left of the power inlet socket. To
switch on, depress the upper part of the switch to move it to the On position.
Chapter 3: W30 Installation
23
Summary of Contents for Wolf W30
