Clavister Wolf W30, Getting Started Manual

Page: 20 / 94

3.3. Rack Installation
The W30 is designed to be installed in most standard 19-inch equipment racks.
In the packaging for the W30 there should be included a Rack Mount Kit which consists of two
brackets, each of which has three screws for attachment to the front-sides of the unit as shown in
the image below. There are predrilled holes already in the sides of the W30 unit which must be
used for attaching the brackets.
After attaching a bracket to either side of the unit, it is ready for rack mounting using a suitable
fastener. Rear support is not necessary.
Rack Mounting Guidelines
The following mounting guidelines should be followed:
• A rack or cabinet used for mounting should be adequately secured to prevent it from
becoming unstable and/or falling over.
• Devices installed in a rack or cabinet should be mounted as low as possible, with the heaviest
devices at the bottom and progressively lighter devices installed above.
Chapter 3: W30 Installation
20