Clavister NetWall W20A Getting Started Manual Download Page 75 | Manualshive

Page: 75 / 89

background image

shipping packaging to ensure that it will not be damaged in transit.

3.

The RMA number must be clearly marked on the outside of the package.

4.

The package is then shipped to Clavister with all the costs of mailing/shipping/insurance
paid by the customer. The address for shipping is:

Clavister AB
Sjögatan 6J
891 60 Örnsköldsvik
SWEDEN

If the product has not yet been registered with Clavister through its website, some proof of
purchase (such as a copy of the dated purchase invoice) must be provided with the shipped
product.

Important: An RMA Number must be obtained before shipping!

Any package returned to Clavister without an RMA number will be rejected and shipped
back at the customer's expense. Clavister reserves the right in such a case to levy a
reasonable handling charge in addition to mailing and/or shipping costs.

Data on the Hardware

Note that Clavister is not responsible for any of the software, firmware, information, or memory
data contained in, stored on, or integrated with any product returned to Clavister pursuant to a
warranty claim.

Contacting Clavister

Should there be a problem with the online form then Clavister support can be contacted by
going to:

https://www.clavister.com/support/

Customer Remedies

Clavister's entire liability according to this warranty shall be, at Clavister's option, either return of
the price paid, or repair or replacement of the Hardware that does not meet Clavister's limited
warranty and which is returned to Clavister with a copy of your receipt.

Limitations of Liability

Refer to the legal statement at the beginning of the guide for a statement of liability limitations.

Chapter 6: Warranty Service

75

«
...
73
74
75
76
77
...
»

Summary of Contents for NetWall W20A


























































































Reviews:

No comments

Related manuals for NetWall W20A

Brand: CAME Pages: 19

Brand: Oracle Pages: 24

Brand: Patton electronics Pages: 12

PCI-6110E/6111E

Brand: National Instruments Pages: 113

Brand: Lucent Technologies Pages: 20

OP-8000-EDFA-1U Series

Brand: Optostar Pages: 9

Brand: Idis Pages: 85

Brand: ZALMAN Pages: 7

Octopus G Series

Brand: TwinMOS Pages: 29

Vocal Performer VE-20

Brand: Boss Pages: 20

PFC Chokes PFC3515V Series

Brand: Delta Electronics Pages: 1

Brand: Hama Pages: 25

Brand: Infoblox Pages: 16

Brand: Matrix Switch Corporation Pages: 54

Brand: Renesas Pages: 4

Xtreme Networked Boat

Brand: Broadband Products Pages: 16

RuggedSwitch RS500

Brand: RuggedCom Pages: 16

Redbooks Emulex VFA5

Brand: IBM Pages: 15

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands