9
Fitting the carbon filter (Part number ST1)
If the appliance is going to be used in recirculation mode then it is necessary to fit a
carbon filter. This will help to absorb unpleasant odours caused by cooking.
IMPORTANT:
Before attempting to fit or remove the carbon filters,
you must ensure the rangehood is switched off first.
1)
Press the handle of the metal grease filter towards the rear
part of the unit until it is released from the front housing, and
remove it by pressing downwards (Fig. 2 - above).
2)
Remove the old carbon filters by twisting them anticlockwise
until they unlatch from the sides of the motor.
3)
Place the new carbon filters (which have two fixing
tongues), turning clockwise so that the tongues latch onto
the motor’s sides.
4) Reposition the metal grease filters.
Summary of Contents for CLPP75L
Page 19: ......
